This page gives details on how the settings for the Global Exposure Control work.

 

Overview


The VRayExposureControl uses the exposure settings of a VRayPhysicalCamera without actually having to render through one.

V-Ray also partially supports the similar Physical Exposure Control in 3ds Max 2016 and later.

 

UI Path


 

||Rendering menu|| > Exposure Control... > Environment and Effects window > Exposure Control rollout > select VRay Exposure Control from the dropdown

 

 

V-Ray Exposure Control


 

 

 

Mode – Chooses between several modes of applying the exposure control.  

From VRay camera – Exposure settings are taken from a VRayPhysicalCamera specified in the Camera node.
From EV parameter
– Exposure settings are based on the Exposure value (EV) parameter.
Photographic
– Exposure is controlled through the Shutter speed, f-number, and ISO parameters.

Camera node – Specifies the VRayPhysicalCamera node from which the exposure settings will be taken.

Exposure value (EV) – Controls the exposure with a single parameter. Increasing it makes the image darker and decreasing it makes it brighter.

Shutter speed – Shutter speed, in inverse seconds, for the still photographic camera. For example, shutter speed of 1/30 s corresponds to a value of 30 for this parameter. 

f-number – Determines the width of the camera aperture and the exposure. 

ISO – Determines the film power (i.e. sensitivity). Smaller values make the image darker, while larger values make it brighter. 

White balance preset – Modifies the image output in the same way that a real-world camera performs a white balance. Objects in the scene that have the specified color will appear to be white in the image. Note that only the color hue is taken into consideration; the brightness of the color is ignored. There are several presets that can be used, most notably the Daylight preset for exterior scenes. 

White balance – Specifies a custom color for the white balance. 

Temperature  – When the the White balance preset is set to Temperature, this parameter controls the white balance color.

 

Notes


  • For the VRayExposureControl to work, make sure that the Use 3ds Max photometric scale option is enabled in the V-Ray Global Switches rollout.